Next, enter the telephone number, and then press OK. Programming speed dials on your Nortel T phone is as simple as that. If you have any questions regarding these steps, please contact us. You may visit us online or call Standard Dial is always available, even when another dialing mode is selected. Automatic Dial Dial the number without choosing a line button first. Your prime line is automatically selected for the call.
Pre-Dial: Dial the number, then press a line button to place the call. When you are on a call, block an incoming priority call. To avoid electronic feedback, keep the receiver away from the speaker during the call, and press Rls to hang up. To retrieve a held call, press the line button for the held call. Language Choice Select English as the language for the telephone display.
Enter a line pool access code. See your system coordinator for a list. This feature is not available on the M telephone. This is used to communicate with devices like fax or answering machines.
Long tones are in effect only for your current call. Press 0 to call the person who left you the message. Press the line button that you want to move Press the button that you want to move the line to Press Rls. The two buttons are exchanged Switch the button caps. Page FEATURE 60 and code 1 to 3 and zone 0 to 6 Make a page announcement through either the internal code 1 or external code 2 speakers, or both code 3. Zone 0 pages all zones. Page announcements are programmed to timeout after a pre-selected amount of time which is set by your installer.
If a line normally has privacy, this permits another telephone that shares the line to join your call by selecting the line while you are using it. If a line normally has privacy disabled, this prevents another telephone that shares the line from joining your call by selecting the line while you are using it. The privacy setting is re-established once you end your call or when you enter the Privacy feature code again. You will be required to enter the System Coordinator password.
Ring Again signals you to call back when the telephone or line pool becomes available. You can also adjust the volume any time your telephone rings. The first press of the button dials the first number or code; the next press dials the next number or code.
You can program up to four numbers or codes separately by break points. Enter the code while you are on a call that you have dialed to save the number.
Enter the code when you are not on a call to redial the saved number. There are two types of speed dial codes: system 01 to 70 and personal 71 to System speed dial codes can be used from any Norstar telephone in the system. They are assigned by your system coordinator. Join Us Close. Join Tek-Tips Forums!
Join Us! By joining you are opting in to receive e-mail. Promoting, selling, recruiting, coursework and thesis posting is forbidden. Students Click Here. Sorry-novice here. Your asking a Norstar question, different thread. But, I know Norstar. You need go into programming under the DN of the telephone, under Line Access, Intercom, make the whatever you want.
All these systems had several things in common; quality, durability, and reliability. Many organizations still have year-old Nortel phone systems still in use today and in great working condition. Nortel digital proprietary phones did not need an external power supply, they were completely powered by the single RJ telephone cable coming from the phone system.
Nortel phone systems are fully digital and solid state, so there are no moving parts. Nortel would program a special key into your system that allowed you to connect as many phones and lines as you paid for.
With the expansion of the internet, Nortel made the BCM series hybrid phone systems, and they had the power to control their users more. Doing so will cause severe damage and might pose a danger. External Phone Lines: This is where you can connect your incoming external telephone lines.
0コメント